Yep! If you are a quilter you have hangups....or you need them!
I'm talking about hanging quilts on the walls.
When I first started quilting over 4 decades ago very few people made quilts for walls. In the early years of my quilting adventure quilts were for beds, couches, picnics, table tops and babies. Rarely did you make a quilt just for the wall.
Now most of the quilts in my home are on the wall or on a ladder leaning against the wall. So this can present a tricky situation if you want to change them out and display different sized quilts in the same area on the wall plus you need to figure out a way to get the quilt safely on the wall with as little damage to both the quilt and the wall.
For years I used a shelf/rod combo. Worked well for the most part, but if the quilt was bigger I was out of luck, and if the quilt was smaller it looked kind of funny. Plus they are not inexpensive.
Many of you have probably tried some of the options that have been out there for a while. You may remember the little blocks that were mounted to the wall that grabbed the top of your quilt.
They were OK for small quilts but a large quilt could be damaged by uneven weight distribution. Honestly I'm not sure they even make them anymore.
There are also a wide range of compression type hangers but the ones I had were tricky to load and so I found I rarely changed out the quilt. Those too seemed to have fallen by the wayside.
I am fortunate to have two quilt ladders that are nice to hang lots of quilts on, the only downside is you don't get to see much of the quilt and of course Winnie is fond of going to the top and then
crying to get help getting down. In reality I think it is just a ploy for attention because if I ignore him he gets down just fine.
Several years ago we did a major custom entertainment wall in our family room.
One of my requirements was that within the cabinet(s) there be room to display some of my award winning quilts. I designed the wall unit and our amazing contractor built exactly what I wanted.
The quilts are inside a cabinet with a built in ladder and there is a glass door to help keep the dust down. I love this and can change them out easily.
Honestly not everyone has the space or the resources to have a custom quilt display cabinet built as part of your entertainment wall, so while this is wonderful, it's probably not going to be something everyone can do.
Some of you may live in a home that has a stair case with a railing. Mine is constantly changing and I love having this space for displaying my quilts.
However I realize that not every home has these types of spaces so the quest continues for the perfect hanger for everyone and every home.
Changing things up
The décor in
my home has changed over the years and if you are like me you want to change
out your quilts with ease. One problem I
ran into is the fact that they are often different widths and utilizing the
same hanger can be problematic. There were often holes in the wall where the
bar or holder had been hung or the rod or hanger was too large or too small.
In my back
hallway I wanted the quilt to hug the wall due to the traffic, so I purchased a 2.5” x 5/16” piece
of trim molding from the lumber yard, drilled a couple of holes in the ends and
put a nail in the wall and just hung the board over the nails. This worked but I’m pretty much stuck with
the size of the board and then there are those pesky holes. Additionally, this only works if the quilt is
not real heavy.
After the wood trim boards I started using curtain rods. They were adjustable, could be hung on the brackets or close to the wall with a screw or nail and were relatively inexpensive. I have several of these around my home. There are issues with these as well. The curtain rod finials can mar the wall paint on the flush mounted ones (hung by just resting the rod on a couple of larger nails behind the quilt so it does not show) when I change them out or take quilts up and down for trunk shows. The ones I have mounted using the brackets that came with the rod can also be an issue because the quilt hangs a couple of inches away from the wall as you can see in the photo above.
Several years
ago I discovered a new product that I thought was just brilliant. Magnetic Invisible Quilt Hangers by the
Magnificent Quilt Company. The system allows for easy hanging of most any size
quilt utilizing a separately purchased metal bar along with the kit containing
magnets, mounting plates and Command™ strips. I was excited and purchased
several sets. A trip to the hardware store, the purchase of two steel bars and
within no time my large, heavy, embroidered quilt was on the wall all for
around $70. Not inexpensive.
That embroidered large quilt hung on this system flat and tucked nicely against the wall for a couple of years but then the magnets started slipping off the metal hanging pieces and the quilt appeared to be too heavy for the hangers to hold in spite of following the recommended spacing and number of hangers for the size of my quilt. The Command strips held well but the magnets seemingly lost their power.
That embroidered large quilt hung on this system flat and tucked nicely against the wall for a couple of years but then the magnets started slipping off the metal hanging pieces and the quilt appeared to be too heavy for the hangers to hold in spite of following the recommended spacing and number of hangers for the size of my quilt. The Command strips held well but the magnets seemingly lost their power.
This system
did have several advantages; it’s easy to install, it provides flexibility, you can’t
see the hanger and it does not mark or damage the wall. The only downside is the one I described but
that is easily remedied with stronger magnets, however this adds to the cost. As purchased it is perfect for
“normal” quilts that don’t weigh as much as a small child. A quick search on the internet and I purchased some rare earth magnet disks and trust me the metal rod and hanging plates are stuck together just fine now. But again the new magnets added to the cost to hang this large and heavy quilt. The search continued...
The PERFECT Solution...
As the
window décor in my home changed over the years I ended up with quite a few of the wider continental
style curtain rods and one day at the hardware store I spied a type of Command™
holder made for hanging pictures and thought hey that just might work with all
those rods I have in the basement.
The metal
rods have sort of a flange feature on both edges that sets down nicely on the post of the
metal or plastic Command picture hanging plate as it is mounted on the wall much like the wire on
the back of a picture. The beauty of this solution is I don’t have to purchase
flat bar stock, the curtain rods are adjustable and the command strips mean
there is no marking of the wall when I take them down and change the size. The command picture hangers only have to be purchased one time as you can buy refills of the hanging strips.
The price can’t be beat either since I
already owned the rods and the Command™ strips were less than $10. For larger quilts I have even put several of the hangers in
the middle of the quilt and just let the sleeve get tucked in the rod as I hung
them on the picture hangers. Overall a great solution. I do use clear packing tape to tape the rods together to the correct length before hanging them and if I change the quilt to a different size I just adjust the rod to length and re-tape.
Recently I purchased a larger rod for a bigger quilt and it ran me less than $15 at a local home goods store. I also love that the quilt hangs tight to the wall and is very secure. The metal curtain rods are much lighter than the ones I purchased for the magnetic system above which helps for larger quilts.
So next time you have a hangup you might want to consider this inexpensive and very flexible option - it might just be the one that works best for you too.
Blessings,
Linda T.
This original design scrap quilt hangs in my bathroom. |
Sources:
MagnificentQuilt.com
Command.com
hangupscompany.com
Kanaby
Builders, Bad Axe, MI
Great information, thank you! Did you USA only 2 command hooks?
ReplyDeletepatsystitch@gvtc.com
Spell check. use
DeleteGreat ideas, Linda. Thanks
DeleteThis sounds like a great way to hang quilts. Like you, I have tried different methods and never been completely happy with any of them. I even have a flat rod to try it out, just need to pick up the hangers.
ReplyDeleteThanks, Bette
I miss your blogposts....your quilt in the latest Primitive Quilts is absolutely gorgeous. I hope to make one myself. Blessings...kathy in WV
ReplyDeleteKathy, after a long hiatus a new post appeared. Seem to have lost my followers. Let me know if you see the new post. Blessings to you my friend.
DeleteI think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article. Goose down duvet
ReplyDeleteThis is my first time i visit here. I found so many interesting stuff in your blog especially its discussion. From the tons of comments on your articles, I guess I am not the only one having all the enjoyment here keep up the good work Hungarian goose down duvet
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteI recently found a gadget called "Hang-it Dang-it" for hanging quilts. I like it because it only uses one nail, the hanging rods are adjustable, and the quilt hangs against the wall. They come in several sizes, and it's easy to switch out quilts when I want - like for seasonal changes.
ReplyDeleteYes, I've seen those. That works well for small quilts. Thanks for sharing
Deletethanks for this post! Do you remember what strength magnets you purchased that worked? I'd like to make a quilt to insulate my gas fireplace when not in use, and attach w/ magnets. (thinking I'd screw cup magnets into a wood bar, then put the bar inside a sleeve in the quilt. (inspired by fashion fireplace covers website). But, I have no idea how strong a 'pull power' i need! For example, would these be too strong? https://www.amazon.com/dp/B07FL7NCYN/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B07FL7NCYN&pd_rd_w=wW3nr&pf_rd_p=21517efd-b385-405b-a405-9a37af61b5b4&pd_rd_wg=C9llo&pf_rd_r=NCSYWB6FP6NWE3ZVFJMX&pd_rd_r=01ef719c-021c-11e9-ade5-fb19e6f8bfdd Cup Magnets,1.26" Diameter, 90 lbs Holding Force, Pack of 8
ReplyDeleteps - quilt itself probably wouldn't be very heavy -- dimensions would be about 4x3 ft.
DeleteYes, I used the rare earth magnets - you can get them various places but I got mind at Harbor Freight. They hold better than the ceramic ones. Here is a link: https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html Great idea about the fireplace quilt too.
DeleteThanks so much for the harbor freight link! The thought of trying to figure out the magnets was holding me back from the project, but now I'm excited to get started! thanks again!
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThanks for sharing such a nice piece of information with us.poster Hanging strips
ReplyDelete