Stash Buster BOM Block #13 ~ Flower Basket

There is just something about Basket blocks....

Basket blocks can be kind of tricky in a quilt layout as most of them are on point so when I designed this quilt with an on-point layout I knew I had to include one.

Flower Basket

12" block - make one

*My version is more scrappy than this layout here but you can do whatever you like.  I used three different red fabrics for the "flowers" but you could make them all different if you wanted a really scrappy look.

 

 A - 3 7/8" x 3 7/8" Square

 Cut 1 square each of three* red fabrics (scraps)

Cut 4 squares of gold print (background)

Cut 1 square of tan print (scraps)

Cut all squares on the diagonal once.

B - 6 1/2" x 3 1/2" Rectangle

Cut 2 of gold print (background fabric)


C - 6 7/8" x 6 7/8" Square

Cut 1 of tan print (scraps) then cut on the diagonal once.  Note: you will only use one of the triangles.


 Cut 1 of gold print (background) then cut on the diagonal once.  Note: you will only use one of the triangles.

Next up layout all the pieces to make sure you like the fabric choices.  I used three different red prints for the "flowers" and played  around a bit to get the look I was happy with.  You could also make every flower a different fabric if you prefer.  That is the great thing about quilting, we all get to do what we like ☺!







I used a stripe for the basket and so I wanted to make sure I had the triangles going the right way so the stripe would match.   Yes I know, my type A is showing!

 I started with the rectangles and added the small triangles to them.  Note how the "ears" extend beyond the one side - this is what you want.   Press to the dark.

I lay them out again just to make sure things are on track and that I haven't turned something the wrong way.

Then I start on the half square triangles.  Sew them together one row at a time.  Since my layout was particular I needed to make sure I didn't get the red out of order.  Once you have all three rows together, press them so you are alternating the seam direction.  Some will be to the dark and some will be to the red.  

 Once I have the rows completed I sew them together.  Here I have the first and the second rows together.  








 


Once I have the two rows together I add the large triangle.  I found it easier to press to the large triangle


 

 

 Add the last row of half square triangles. 

Add a rectangle unit, press to the rectangle.

Add the last rectangle unit and press toward the rectangle.  All that is left now is to add the final large triangle.  Press to the triangle.

TA DAH!  Stash Buster BOM #13 block is done!  WTG!

Block should measure 12.5" which will give you a 12" finished size block.  Be sure to keep an eye on that scant 1/4" seam allowance, especially at the seam intersections.  Hope you like this block and congratulations - just a few more months for the big reveal!  

Quilty hugs....

Linda T.

 

BOM...More fun with Block #6

Next up:  #6 - Road to California

 

This is a pretty easy block.  Just some 4-patch units and some half-square triangle units.

Cutting  (note colors are from pic above)

A)  Cut 2 1/2" x 2 1/2" square

Cut 10 squares of red print (scraps)

Cut 10 squares of gold print (background)

B) 4 7/8" x 4 7/8" square (do not cut on diagonal)

Cut 2 squares gold print (background)

Cut 2 squares green print (scraps)

 Half square triangle units.  Take one each of background and scrap print and draw a line down the middle, sew a 1/4" seam on either side. (or use any method you prefer - I show how to make them using other methods in the early blocks of the BOM) Do this with both sets of squares you cut.

Cut on the line to make 4 half square units and press to the dark.

 4-Patch units

Sew a background square to a scrap square along one edge.  These are perfect for chain piecing.  If you alternate the fabric on the top as you piece they will be perfectly set up for sewing the next step.  Keep them together in pairs and press to the dark.

 Still chained together.

 Lay out the half square units and the 4-patch units following the block picture.  Make sure you orient the 4 patch units the correct direction.  What you basically have here is a 9 patch block.

I like to take the center row and lay them on top of the left - put a pin in to hold them together in the correct way and take them to the machine.  Take time to make sure the edges are aligned.  Sew along the right hand edge. 

 

I like to press the seam before I add the other row but that is up to you.  I find it easier to get the pressing going the correct way without having to fight with the other seam.

 

 This intersection is the one you want to see - pay attention to the pressing so this is not covered up.  This really helps when you sew the rows together and is what helps keep you from cutting off the points when you sew that next seam.

 Keeping the same layout, I repeat the process.  Lay the right hand row on top of the middle row and pin.  At this point the first blocks are chained together.  I don't cut them apart. Take to the machine and sew along that right hand edge.

Pressing is key here.  Make sure you can see that intersection marked by my pencils - very important. You will note that I have alternated the seams when pressing.  This makes it very easy to nest them together nicely which makes your piecing more precise.

 Closer view.  When you go to join the rows you will want to be able to see this so you don't cross the intersecting line.  This is shown in great detail in the early blocks here on my blog.

Ta Dah!  Road to California block is done!!!